Stand-Off TrellisTM
QMH Stand-Off Trellis consist in using a high quality, T316 stainless in a brushed finishing stand-off as support point of the trellis. The stand-off uses a 3/8" socket cap screw to fastener on the wall from inside. This stand-off allow to create the rectangle pattern as well as diamond patter. This system is also very simple and it only take few steps to install.
SOCKET HEAD CAP SCREW
|
|
 |
|
ITEM |
A |
B |
L |
WT(lb) |
|
3078S-0850 |
5/16”-18 |
0.46” |
2” |
0.045 |
|
3078S-1038 |
3/8”-16 |
0.56” |
1.50” |
0.058 |
RELLIS EXTENDER
|
|
 |
|
ITEM |
A |
B |
D |
L |
WT(lb) |
|
8001S |
0.90” |
1.18” |
3” |
4” |
0.5 |
DOME NUT
|
|
|
ITEM |
THREADS |
|
3072S-A-06 |
1/4”-20 RH |
|
3072S-A-06-L |
1/4”-20 LH |
|
3072S-A-08 |
5/16”-18 RH |
|
3072S-A-08-L |
5/16”-18 LH |
DROP IN ANCHOR
|
|
 |
|
ITEM |
A |
B |
L |
|
445S-08 |
5/16” |
0.38” |
1.50” |
|
445S-10 |
3/8”-16 |
0.50” |
1.50” |
HAND SWAGE STUD
|
|
 |
|
ITEM |
A (CABLE) |
B |
L |
|
7801S-HS-0603 |
1/8” |
1/4”-20 x 1-7/8” |
3-3/4” |
|
7801S-HS-0605 |
3/16” |
1/4”-20 x 1-7/8” |
4-1/4” |
CROSS CABLE CLIP
|
|
 |
|
ITEM |
A (Wire) |
B |
L |
|
263S-03 |
1/8” |
3/4” |
7/8” |
|
263S-05 |
3/16’ |
3/4” |
7/8” |
|
263S-06 |
1/4” |
3/4” |
1” |
| QUALITY MARINE HARDWARE |
| Address | 5001 LINDSAY COURT CHINO, CA. 91710 |
| oscar.qmh@gmail.com | |
| Website | www.qmh-inc.com www.qmharchitectural.com |
| Tel | 909.548.2884 , 888.335.6888 |
| Fax | 909.548.289 |
| EAST COAST SALES OFFICE |
| Address | 183 Columbia, Rd., Hanover, MA 02339 #21 |
| don.qmh@gmail.com | |
| Website | www.qmh-inc.com www.qmharchitectural.com |
| Tel | 781.312.7242 |
| Fax | 781.312.7244 |
