Ever Green Trellis-Ever Green Trellis

Ever Green Trellis^TM

The Ever green system consists in using a swing bolt, which will allow to adjust the clearance between the vine and the wall using different length of the swing bolt and a 2” backing washer for support, plus the swage stud with cable.

EYE BOLT

BACKING WASHER

DROP IN ANCHOR

HAND SWAGE STUD

 
CROSS CABLE CLIP

The following are some of the patterns for trellis ideas:

How to design a Ever Green Trellis^TM?

- Determine your trellis area, which can be a rectangular Diamond shape ( see illustration 1-2 and 1-3) and choose the swing bolt or stand-off for your system.

- Drill ½” hole every 1’-2’ distance (depending on type of vine) on the top and bottom and left and right of your trellis area.

- Place the 3/8” drop in anchor into each hole.

- Put the socket screw inside the stand-off and screw on to the wall or screw in the swing bolt if you chose the Ever Green Trellis System.

- Place each end of the cable assemblies into the swing bolt or stand-off on each side of the trellis. ( Note: cable assembly can be provided by QMH or Hand Swage fittings are available to assemble at site)

- Tighten the nuts on both ends to tension the cable. ( Just enough to hold the vine)

- Place  the cross cable clip on the intersection where the cable need extra support of the vine. 

Optional: Trim the excess threaded stud and use a round cap or cap nut to finish.