Silver Moon Trellis-Silver Moon Trellis

QMH Silver Moon Trellis^TM

The Silver Moon system consists of using a custom made stainless brushed anchor with cap, and swage stud with cable, this system will allow to make the trellis in rectangular shape and as well as diagonal shape. The brushed finish of the anchor will give your garden a stylish look.
 

TRELLIS ANCHOR

DROP IN ANCHOR

HAND SWAGE STUD

 
CROSS CABLE CLIP

The following are some of the patterns for trellis ideas:

How to design a Silver Moon Trellis^TM ?

- Determine your trellis area which can be a rectangular area or diagonal shape ( see illustration 1-1, 1-2 and 1-3).

- Drill 3/8” holes every 1’-2’ (depending on type of vine) on the four edges off your trellis area.

- Place the 5/16” drop-in anchor in to the holes.

- Bolt the Trellis Anchor using a 5/16” bolt to the stucco.

- Place each end of the cable assemblies into the pre-drilled holes on the trellis anchor, install the cable assemblies vertically and horizontally for square pattern, and install 2 cable assemblies into each trellis anchor at 180 and 45 degrees for diagonal pattern..(see illustration 1-2)(Note: cable assemblies might be provided by QMH or Hand Swage fittings are available to assemble at site)

- Tighten the nuts on each end to tension the cable.

- Place the cap on each trellis anchor and you are done.

- Place the cross cable clip to support the horizontal cable if necessary.